background image

 2
 

Table of Contents

Table of Contents   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2
Safety Information   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2
Warranty   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 4

One-Year Manufacturer Defect Warranty  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 4
Warranty Claim Procedure  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 4

Pre-Installation  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 5

Tools Required   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 5
Hardware Included  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 5
Package Contents    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 6
Specifications    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 6 
Planning Installation    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 7

Installation   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 9

Operation .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 12
Maintenance   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 13

Replacing the Baffle Nets    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 13
Replacing the Light Bulbs   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 13

Care and Cleaning    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 14

Range Hood   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 14
Baffle Nets   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 15

Troubleshooting   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 15

Wiring Diagram    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 17 
External Diagram   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 17

Service Parts  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 18

Safety Information

General SafeTy InfOrMaTIOn

1 .  Use this unit only in the manner intended by the manufacturer . 

If you have any questions, contact the distributor, importer, or 
manufacturer .

2 .  Please carefully read this guide before installing or using this 

product . Save this guide for the local electrical inspector’s use .

3 .  This range hood has a thermally protected system for the motor, 

which will shut down automatically if the motor is overheated . If 
the overheat protection trips, disconnect the power and wait for 
10 minutes for the motor to cool down .

InSTallaTIOn SafeTy InfOrMaTIOn

1 .  The installation instructions in this manual are intended for 

qualified installers, service technicians, and others with a 
technical or electrical background . Never attempt to install this 
appliance yourself . 

2 .  Your installation must comply with all applicable local codes  

and standards . 

3 .  This appliance must be grounded . In the event of an electrical 

short circuit, grounding reduces the risk of electric shock by 
providing an escape wire for the electric current .

4 .  Sufficient air is needed for proper combustion and exhausting 

of gases through the duct cover to prevent back drafting . Follow 
manufacturer guidelines and safety standards, such as those 
published by the National Fire Protection Association (NFPA), the 
American Society for Heating, Refrigeration, and Air Conditioning 
Engineers (ASHRAE), and the local code authorities .

5 .  Old duct work should be cleaned or replaced if necessary . 

Check and properly tape all joints on duct work to ensure proper 
connections . 

DANGER: 

Turn off the power circuit breaker or the power 

switch on the junction box before installing or servicing 
this unit . Touching circuitry inside the range hood while it is 
energized will result in death or serious injury .

DANGER: 

All electrical wiring must be properly installed, 

insulated, and grounded . Improper insulation and grounding 
will result in deadly electrical shock .

DANGER: 

If installing this unit over a gas range, turn off 

the gas at the source before installing or serving this unit .

WARNING: 

Attempting to install or service this unit 

when you do not have the necessary technical or electrical 
background could result in personal injury .

WARNING: 

The unit has sharp edges . Always wear safety 

gloves during installation, cleaning, or servicing .

WARNING: 

Always leave safety grills and filters in place . 

Without these components, operating fans could catch on to 
hair, fingers, or loose clothing .

WARNING: 

Stay clear of the rotating fan when the motor 

is running . 

WARNING: 

Keep this appliance clean and free of grease 

and residue build-up at all times to prevent fires .

Summary of Contents for 654OVSN017STS





















Reviews: