11 HOMEDEPOT .COM
Please contact 1-800-394-1720 for further assistance .
Installation (continued)
6
Installing the range hood
DANGER:
Turn off the power circuit breaker or the
power switch on the junction box before installing this
unit . Touching circuitry inside the range hood while it is
energized will result in death or serious injury .
DANGER:
If installing this unit over a gas range, turn off
the gas at the source before installing or serving this unit .
□
Lift the range hood (A) up under the cabinet to determine
its final position . Mark the location of the four keyhole
mounting slots (1) on the underside of the cabinet .
□
Set the range hood (A) aside on a protective surface .
□
Drill four pilot holes in the locations that you marked .
□
Screw the four long tapping screws (AA) into the pilot
holes . Do not tighten the screws all the way – leave the
screw heads about 7 mm (0 .28 in .) from the cabinet
surface .
□
Lift the range hood (A) into position, feeding the power
cable and the electrical wires through the power access
opening . Allow some slack in the cable and wires so that
the appliance can be moved if servicing is ever necessary .
□
Position the range hood (A) so the large end (2) of the
keyhole mounting slots (1) are over the screws (AA) . Then
push the range hood (A) toward the wall so the screws (AA)
are in the neck (3) of the keyhole slots . Tighten the screws
(AA) . Ensure that the range hood (A) is securely fastened to
the cabinet before releasing it .
□
If applicable, test the damper blade to ensure it rotates up
and down freely .
□
If applicable, connect the vent work to the range hood (A) .
Seal the joints with duct tape to ensure an airtight fit .
□
Reconnect the power supply cable and wires to the
electrical supply .
□
Re-install the bottom panel and baffle nets . Ensure that
the holes beside the fan guard align with the holes on the
bottom panel before inserting the screws .
□
Turn the power on and ensure that all lights and fans are
operating correctly .
AA
1
1
3
AA
2
1
AA
A