5
Xero Twin P/L
349-057.06
349-057.06
+ 0.
5
0
+ 0.020”
0
6
0.236”
20
0.787“
+ 0.
5
0
+ 0.020”
0
6
0.236”
R 4
0.157”
R 4
0.157”
80
3.150”
16
0.630“
30.4
1.197”
+ 0.3
0
+ 0.012”
0
15
0.591“
wood:
16 mm
/ 0.630“
Assembly axis:
625 mm
/ 24.606"
Fixing axis Xero Twin P/L accessories
625
24.606"
625
24.606"
625
24.606"
625
24.606"
625
24.606"
15
0
5.
906
“
15
0
5.
906
"
2300
90
.551
"
1/2019 (US)
The lower end of the profile is marked with “profile
below”.
Wooden panels on to which Xero Twin P/L is to be fixed,
must be countersunk as follows: (1).
Screw the profile Xero Twin P/L on to the panel from the
rear.
Fix the profile caps 349-057.06 to the top of the profile and
to the bottom of the power supply, before the profile is
installed to the panel (2).
Assembly dimensions / Layout
Xero Twin P/L Aluminium profiles can be screwed on panels or various substructures on the wall.
The accessories from Xero Twin P/L and Xero 8 can be used.
Assembly in wooden panels
Please observe the indications concerning weight loads and ensure that the substructure of the wall units/furniture and their fixtures can
support the expected loads.
With free-standing furniture, ensure that there is sufficient stability even with the intended merchandise supports.
Recommendation for profile axis with Xero Twin P/L
accessories.
Assembly dimensions: Xero Twin P/L profile screwed on to countersunk wooden panels from the rear / cross-axis
Cross-axis:
Merchandise supports are
positioned centrally and hooked
into one profile.
