9
Omnio P/L
6/2020 (EN)
4.5 Shelf frame
The shelf frame is positioned on the inserted shelf sup-
ports. There are no screws in the corners of shelf frames.
They are simply placed onto the shelf supports.
Electrified shelf frames are fitted with a contacting unit
under the front left corner.
Fig. 25: Shelf frame
5 Installation
WARNING
Risk of injury from falling goods or merchandise
supports. If the installation is not executed properly
or if the substrate cannot accommodate the neces-
sary loads, the system can fail.
>
Make sure that the fixtures and the base can
support a pulling force of 0.1 kN per mounting
point.
5.1 Unpacking
Check the delivery for completeness and transport da-
mage immediately upon receipt.
Proceed as follows if there is apparent transport dama-
ge:
• Do not accept delivery, or only accept delivery subject
to reservation.
• Note the scope of damage on the transport docu-
ments or on the delivery ticket of the freight forwarder.
• Initiate the claim process.
Packaging
The product is safely packed so that transport damage is
unlikely.
• Keep the original packaging for later transport.
• Only ship the product in the original packaging.
• Comply with all instructions that are specified on the
packaging.
Disposing of packaging material
If packaging material is no longer required, dispose of
it in accordance with the locally-applicable disposal
regulations.
5.2 Storage
Store the product and its components under the following
conditions:
• Do not store outdoors.
• Store in a dry and dust-free location.
• Do not expose to aggressive media.
• Protect from sunlight.
• Avoid mechanical shocks.
• Storage temperature:
23 °C
73 °F
• Relative humidity: 50 %
5.3 Requirements for the installation
location
The installation location must meet the following require-
ments:
• The installation location must be dry. Installation out-
doors is prohibited.
• The ceiling must be designed for, and able to support,
the load to be borne (check with architect and structu-
ral engineer).
