Visonic TOWER CAM PG2 TOWER CAM PG2 Installation Instructions Manual Download Page 8

D-304493 TOWER CAM PG2

 

Installation Instructions 

FUNCTIONAL 

 

IR Illumination 

10 m (33 ft) 

Picture Resolution 

320x240 pixels QVGA or 

160X120 pixels QQVGA

 

Frame Rate 

2 fps  

WIRELESS

 

 

Frequency Band (MHz)

 

Europe and rest of world:

 433-434, 868-869 

USA:

 912-919 

Note:

 Only devices operating in band 912-919 MHz are UL/ULC listed.

    

Communication Protocol

 

PowerG

 

Tamper Alert

 

Reported when a tamper event occurs and in any subsequent message, until the tamper switch is restored

 

MOUNTING

 

 

Mounting Type

 

Wall mounting 

Mounting Height

 

1.5 – 3.0 m (5 – 10 ft).

 

Horizontal Adjustment

 

-45° to +45°, in 5° steps 

Vertical Adjustment

 

0° to -10°, in 2.5° steps

 

ENVIRONMENTAL

 

 

Operating Temperatures

 

-35°C to 60°C (-31°F to 140°F) 

Note:

 For UL/ULC installation, evaluated to 66°C

 

Storage Temperatures

 

-35°C to 60°C (-31°F to 140°F)

 

Humidity 

 

95% max. 

White Light Immunity

 

Above 25000 lux

 

PHYSICAL

 

 

Size (H x L x W)

 

166 x 147 x 124 mm (6-9/16 x 5-13/16 x 4-7/8”) 

Weight (with battery)

 

700 g (25 oz). 

Color

 

White 

PATENTS

 

U.S. Patents 7250605 

 6818881 

 5693943 (other patents pending) 

 

 

WARRANTY

 

 

Visonic Limited (the “Manufacturer") warrants this product only (the "Product") to the original purchaser only 
(the  “Purchaser”)  against  defective  workmanship  and  materials  under  normal  use  of  the  Product  for  a 
period of twelve (12) months from the date of shipment by the Manufacturer.   
This  Warranty  is  absolutely  conditional  upon  the  Product  having  been  properly  installed,  maintained  and 
operated under conditions of normal use in accordance with the Manufacturers recommended installation 
and operation instructions.  Products which have become defective for any other reason, according to the 
Manufacturers  discretion,  such  as  improper  installation,  failure  to  follow  recommended  installation  and 
operational  instructions,  neglect,  willful  damage,  misuse  or  vandalism,  accidental  damage,  alteration  or 
tampering, or repair by anyone other than the manufacturer, are not covered by this Warranty. 
The  Manufacturer  does  not  represent  that  this  Product  may  not  be  compromised  and/or circumvented or 
that  the  Product  will  prevent  any  death  and/or  personal  injury  and/or  damage    to  property  resulting  from 
burglary,  robbery,  fire  or  otherwise,  or  that  the  Product  will  in  all  cases  provide  adequate  warning  or 
protection.      The Product, properly installed and maintained, only reduces the risk of such events without 
warning and it is not a guarantee or insurance that such events will not occur.  

THIS  WARRANTY  IS  EXCLUSIVE  AND  EXPRESSLY  IN  LIEU  OF  ALL  OTHER  WARRANTIES, 
OBLIGATIONS  OR  LIABILITIES,  WHETHER  WRITTEN,  ORAL,  EXPRESS  OR  IMPLIED,  INCLUDING 
ANY  WARRANTY  OF  MERCHANTABILITY  OR  FITNESS  FOR  A  PARTICULAR  PURPOSE,  OR 
OTHERWISE.    IN  NO  CASE  SHALL  THE  MANUFACTURER  BE  LIABLE  TO  ANYONE  FOR  ANY 
CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS WARRANTY OR ANY OTHER 
WARRANTIES WHATSOEVER, AS AFORESAID. 

THE MANUFACTURER SHALL IN NO EVENT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, 
CONSEQUENTIAL  OR  PUNITIVE  DAMAGES  OR  FOR  LOSS,  DAMAGE,  OR  EXPENSE,  INCLUDING 
LOSS  OF  USE,  PROFITS,  REVENUE,  OR  GOODWILL,  DIRECTLY  OR  INDIRECTLY  ARISING  FROM 
PURCHASER’S  USE  OR  INABILITY  TO  USE  THE  PRODUCT,  OR  FOR  LOSS  OR  DESTRUCTION  OF 
OTHER PROPERTY OR FROM ANY OTHER CAUSE, EVEN IF MANUFACTURER HAS BEEN ADVISED 
OF THE POSSIBILITY OF SUCH DAMAGE. 
THE MANUFACTURER SHALL HAVE NO LIABILITY FOR ANY DEATH, PERSONAL AND/OR BODILY 
INJURY  AND/OR  DAMAGE  TO  PROPERTY  OR  OTHER  LOSS  WHETHER  DIRECT,  INDIRECT, 
INCIDENTAL, CONSEQUENTIAL OR OTHERWISE, BASED ON A CLAIM THAT THE PRODUCT FAILED 
TO FUNCTION.

 

 

However, if the Manufacturer is held liable, whether directly or indirectly, for any loss or damage arising 
under this limited warranty, 

THE MANUFACTURER'S MAXIMUM LIABILITY (IF ANY) SHALL NOT IN 

ANY CASE EXCEED THE PURCHASE PRICE OF THE PRODUCT,

 which shall be fixed as liquidated 

damages and not as a penalty, and shall be the complete and exclusive remedy against the Manufacturer.  
When accepting the delivery of the Product, the Purchaser agrees to the said conditions of sale and 
warranty and he recognizes having been informed of. 
Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so these 
limitations may not apply under certain circumstances.  
The Manufacturer shall be under no liability whatsoever arising out of the corruption and/or malfunctioning 
of any telecommunication or electronic equipment or any programs. 
The  Manufacturers  obligations  under  this  Warranty  are  limited  solely  to  repair  and/or  replace  at  the 
Manufacturer’s  discretion  any  Product  or  part  thereof  that  may  prove  defective.    Any  repair  and/or 
replacement shall not extend the original Warranty period.  The Manufacturer shall not be responsible for 
dismantling  and/or  reinstallation  costs.    To  exercise  this  Warranty  the  Product  must  be  returned  to  the 
Manufacturer  freight  pre-paid  and  insured.    All  freight  and  insurance  costs  are  the  responsibility  of  the 
Purchaser and are not included in this Warranty. 
This  warranty  shall  not  be  modified,  varied  or  extended,  and  the  Manufacturer  does  not  authorize  any 
person  to  act  on  its  behalf  in  the  modification,  variation  or  extension  of  this  warranty.  This  warranty  shall 
apply to the Product only.  All products, accessories or attachments of others used in conjunction with the 
Product, including batteries, shall be covered solely by their own warranty, if any.  The Manufacturer shall 
not be liable for any damage or loss whatsoever, whether directly, indirectly, incidentally, consequentially or 
otherwise,  caused  by  the  malfunction  of  the  Product  due  to  products,  accessories,  or  attachments  of 
others, including batteries, used in conjunction with the Products. This Warranty is exclusive to the original 
Purchaser and is not assignable.  
This Warranty is in addition to and does not affect your legal rights. Any provision in this warranty which is 
contrary to the Law in the state or country were the Product is supplied shall not apply.  

Warning:

 The user must follow the Manufacturer’s installation and operational instructions including testing 

the Product and its whole system at least once a week and to take all necessary precautions for his/her 
safety and the protection of his/her property. 

1/08

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  

  

 

EMAIL: [email protected] 
INTERNET: www.visonic.com 

VISONIC LTD. 2015      TOWER CAM PG2   D-304493   (Rev. 3, 1/15)

 

 

 

 

 

 

 

 

Summary of Contents for TOWER CAM PG2 TOWER CAM PG2









Reviews: