Visonic TOWER CAM PG2 TOWER CAM PG2 Installation Instructions Manual Download Page 7

 

D-304493 TOWER CAM PG2

 

Installation Instructions 

3. COMPLIANCE WITH STANDARDS 

Compliance with Standards 

The TOWER CAM PG2 is designed to comply with the following standards: 

Europe (CE):

 EN 300220, EN 301489, EN 60950, EN 50130-4, EN 50130-5, EN 50131-2-2, EN 50131-6, 

EN 50131-1 Grade 2 Class IV 
The  TOWER  CAM  PG2  is  compatible  with  the  RTTE  requirements  -  Directive  1999/5/EC  of  the  European 
Parliament and of the Council of 9 March 1999 and EN50131-1 Grade 2 Class IV. 

UK:

  This  product  is  suitable  for  use  in  systems  installed  to  conform  to  PD6662:2010  at  Grade  2  and 

environmental class 4. DD243 and BS8243 

USA:

 CFR 47 Part 15 (FCC), UL-639 

Canada:

 RSS 210 

The Power G peripheral devices have two- way communication functionality, providing additional benefits as described in 
the  technical  brochure.  This  functionality  has  not  been  tested  to  comply  with  the  respective  technical  requirements  and 
should therefore be considered outside the scope of the product’s certification.

 

 

 

EN 50131-1 Security Grade 

Grade 2 

EN 50131-1 Environmental Class 

Class IV 

FCC Compliance Statement 

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits 
are  designed  to  provide  reasonable  protection  against  harmful  interference  in  residential  installations.  This  equipment  generates  uses  and  can 
radiate  radio  frequency  energy  and,  if  not  installed  and  used  in  accordance  with  the  instructions,  may  cause  harmful  interference  to  radio  and 
television reception. 
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause such interference, which can 
be verified by turning the device off and on, the user is encouraged to eliminate the interference by one or more of the following measures: 
– Re-orient or re-locate the receiving antenna. 
– Increase the distance between the device and the receiver. 
– Connect the device to an outlet on a circuit different from the one that supplies power to the receiver. 
– Consult the dealer or an experienced radio/TV technician. 

WARNING!

 Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority 

to operate the equipment.

 

 

This device complies with FCC Rules Part 15 and with Industry

 

Canada licence-exempt RSS standard(s). Operation is subject to two conditions: 

(1) This device may not cause harmful interference, and (2) this device must accept any interference that may be received or that may cause 
undesired operation. 

 

Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisee 
aux  deux  conditions  suivantes  :(1)  l'appareil  ne  doit  pas  produire  de  brouillage,  et  (2)  l'utilisateur  de  l'appareil  doit  accepter  tout  brouillage 
radioelectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement. 

   

 

W.E.E.E. Product Recycling Declaration

 

For    information  regarding  the  recycling    of  this  product    you  must  contact  the    company from which you orignially purchased it. If you are discarding this product and not 
returning it for repair then you must ensure that it is returned as identified by your supplier. This product is not to be thrown away with everyday waste. 
Directive 2002/96/EC Waste Electrical and Electronic Equipment.

 

APPENDIX:

APPENDIX:

APPENDIX:

APPENDIX:    SPECIFICATIONS

SPECIFICATIONS

SPECIFICATIONS

SPECIFICATIONS    

OPTICAL

 

 

Black Mirror Max. Coverage

 

Up to

 

12 m (40 ft) / 90°

 

Detector Technology

 

8 independent quad PIR detectors operating in true Quad configuration

 

 

 

Figure 6. Coverage Pattern

 

A.

 Top view 

B.

 Side view of each detector 

C.

 Image coverage range

 

Pet Immunity

 

Up to 18 Kg (40 lb)

 

ELECTRICAL

 

 

Input Power

 

Two 3V / 2400 mAh, CR17450 Lithium batteries manufactured by EVE.

 

Battery Life (for typical use)

 

3 years 

Note:

 Minimum one year, typical 3 years (not verified by UL/ULC)

 

Low Battery Threshold 

4.0 V 

Optional Mains Supply 

Additional to batteries, 7.5 V DC, 1.5 A 

Note:

 For UL/ULC installation, the 7.5 VDC power connection was not evaluated by UL.

 

Summary of Contents for TOWER CAM PG2 TOWER CAM PG2









Reviews: