Vislink Quantum User Manual Download Page 36

Page: 36 / 75

Quantum Receiver User Manual

Web GUI Screens

Issue No: A

Page: 36

Ref: ?-Insert_Document_Part_No._Here-?

6.2.5.2.

Receivers

The Receivers accordion panel details the active receiver settings.

Figure 6-18

Status>Receivers

The Receivers panel displays the following settings:



Status – displays the Connected/Disconnected status of the demodulator.



Lock – displays the Locked/Not Locked status of the signal. The receiver can only
down-convert and demodulate the RF input when carrier lock has been achieved.



MER (dB) – displays the Modulation Error Ratio (MER) of the input signal.



Quality – displays the quality value of the input signal.



RSL (dBm) – displays the Receive Signal Level (RSL) of the input signal.

Clicking

displays further information about the input signal for each of the

four RF input channels.

Figure 6-19

Status>Receivers – More Information

Summary of Contents for Quantum












































































Search results

Summary of Contents for Quantum

Reviews:

Related manuals for Quantum

Brands by name

Popular brands

Vislink Quantum, User Manual

Search results

Summary of Contents for Quantum

Reviews:

Related manuals for Quantum

Brands by name

Popular brands