Vislink Quantum User Manual Download Page 28 | Manualshive

Page: 28 / 75

background image

Quantum Receiver User Manual

Web GUI Screens

Issue No: A

Page: 28

Ref: ?-Insert_Document_Part_No._Here-?

Copyright © 2021 Vislink is a Vislink Technologies Inc. companies

6.

Web GUI Screens

6.1.

Overview

The Quantum Receiver is designed to be configured and monitored remotely by
the web-based Graphical User Interface (GUI). This section describes, in
sequence, all the menus and screens for controlling the unit.

For details of the web-based GUI for configuring and monitoring locally using
the front panel touch-screen display, see

Section 5 Front Panel Display

The main components of the web GUI display are shown below.

Figure 6-1

Web GUI Overview

6.1.1.

Menus

By selecting each of the main menus, the central panel will display further
relevant detail, while the sidebars will continue to display the selected options.

Figure 6-2

Main Menus

Four main menus are available:



Status – enables selection of status information to be displayed in the left- and
right-hand sidebars (see

Section 6.2).



Settings – enables selection and display of detailed settings for RF, Decoder,
Stream, Presets, Network, Global and Admin functions (see

Section 6.3).



Info – enables selection and display of unit and license details (see

Section 6.4).

Main Menus

Detail displayed in Central Panel

Options

GUI Display

Central Panel

Displays the selected main menu detail

Right-hand Sidebar

Displays selected Active

Preset

Left-hand Sidebar

Displays selected Streaming

Video and Antenna Status

«
...
26
27
28
29
30
...
»

Summary of Contents for Quantum












































































Reviews:

No comments

Related manuals for Quantum

Brand: Harman Kardon Pages: 24

Brand: Harman Kardon Pages: 19

Brand: Harman Kardon Pages: 2

Brand: Harmonic Pages: 37

Brand: Sansui Pages: 12

Brand: Sangean Pages: 6

Gewa Andromeda REC4

Brand: Abilia Pages: 48

Brand: Audi Pages: 35

Brand: Audiovox Pages: 24

Brand: Lanzar Pages: 19

Brand: Tactic Pages: 2

Brand: BluStream Pages: 6

Brand: iSimple Pages: 12

Brand: Altronix Pages: 8

Brand: Icom Pages: 54

Brand: Marantz Pages: 101

Brand: Arris Pages: 24

Brand: Aiwa Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands