6
C. Power on the camera.
D. Select a micro-HDMI cable of a suitable length from the set of cables provided in
the case. Attach one end of the cable to the HDMI connector (shown below).
Connect the other end to the camera.
Note: The camera must be powered on when connecting the HDMI cable.
E. When the camera is connected, two LEDs alternate between red and green, indicating that
the software is loading. As shown in the figure below, when HEROCast is transmitting, a
steady green LED is visible.
F. HEROCast has several configuration options allowing for precise specification of the
transmission protocols and video encoding. To configure HEROCast or to update the
firmware, refer to Section 5.
Summary of Contents for HEROCAST
Page 3: ... 1 1 WEEE STATEMENT ...
