5
4. HEROCAST SETUP
4.1.
Parts and Illustration of HEROCast
4.2.
Setting Up HEROCast
A. Connect the antenna using the tools provided. Do not over tighten. The figure
below shows the antenna connector.
B. Attach the battery or the battery eliminator. If you are setting up HEROCast for the
first time, make sure that the battery is fully charged. If the battery is not charged,
use the battery eliminator for the setup. The battery eliminator and battery can be
swapped without reconfiguring the device.
Insert the hooked end of the battery into the HEROCast system first. Note the
notch where the hook at the end of the battery must be inserted. Insert the hook
and then press the battery connector firmly into the transmitter connector.
Swing the spring clip over the back of the battery.
Summary of Contents for HEROCAST
Page 3: ... 1 1 WEEE STATEMENT ...
