VisionTrack VT1000, User Manual

Page: 8 / 21

13
SOFTWARE INSTALLATION
1. Connect the SD card into your PC (if your computer does not have and
SD card slot use the USB SD card reader) and open the “My Computer”
2. Right‐click the “VR1000” drive and select [Open]
3. Double click [SETUP.EXE] in the [pcsw] folder.
4. Select the language and then follow the dialog box prompts.
5. The “PC Viewer VT1000” icon will be displayed on your desktop.
NOTE: To Un ‐ install the PC Viewer Software
Make sure the program is not running and open the ‘Control Panel’
Select ‘Remove Program’ and remove the PC Viewer Software.
The PC Viewer Software is on the provided SD card. (Also available on our
website.)
14
Initialize SD Card
To initialize the SD card, click on the above icon and you will be
presented with the following screen to choose the card to initialize. Click ‘Ok’
when selected.
On the following screen, check the ‘Quick Format’ button and uncheck the
‘Backup Configuration File’ and click ‘Start’ to begin initialisation.
initialize SD Card’ Icon
NOTE: The PC Viewer software will automatically be copied to [pcsw]
folder on the SD card.
13 14
INITIALIZE SD CARD SOFTWARE INSTALLATION