35
APPENDIX
‐
Upgrade
Make a folder called [program] on the SD root folder as shown below,
Copy “XXXXXX_x.x.x.bin” file to the SD card [program] folder.
1.
Prepare
Firmware
2.
Upgrade
VT1000
Insert the prepared SD card to VT1000 unit and turn on the
power.
The Blue & Red LED will quickly blink while the unit is upgrading. It will also
‘beep’ continuously. Upgrading the unit usually takes about 30 seconds.
Warning:
Do
not
turn
off
the
power
during
upgrading.
If
the
upgrade
fails,
the
VT1000
unit
should
be
returned
to
your
local
distributor.
Once the upgrading is finished, the unit will automatically turn off and on the power.
NOTE:
To
get
the
upgrade
firmware,
please
contact
your
local
distributor.
36
Technical
Support
&
Warranty
TECHNICAL
SUPPORT
For Technical Support, please contact your local distributor.
LIMITED
WARRANTY
This product is supplied with 1 year warranty. The Warranty excludes products
that have been misused, (including accidental damage) and damage caused by
normal wear and tear. In the unlikely event that you encounter a problem with
this product, it should be returned to the place of purchase.
35
36
TEChNICAL SUPPORT & WARRANTY
APPENDIX - UPGRADE
Summary of Contents for VT1000
Page 20: ......
Page 21: ...http www visiontrack com ...
