DQ Technology, Inc. / VisionNet
Page 98
M605N User Manual Revision 3.1
1.C Under “Wireless -‐ Advanced”
802.11N Only
Off
RIFS
Advertisment
Off
This is a legacy protocol
OBSS
Coexistence
Off
This is used in
environments where
multiple APs use the
same BSSID Name – but
this can open up the
possibility of hacking if
not in a controlled
environment
RX Chain
Power Save
Off
WMM is preferrable
MultiCast Rate
Auto
Basic Rate
Default
Xpress
Technology
Disabled
This is only for Broadcom
wireless clients – We do
not suggest Proprietary
Settings be used ever
Transmit
Power
100%
You may wish diminish
output in MTUs where
there are many APs in the
area – You cannot,
however, control other
Consumer Electronics
WMM
Enabled – This is required
for higher speeds – only
WMM Advertise should
be disabled
WMM No
Acknowledge
ment
Disabled – some devices
may not support this
WMM APSD
This is a WMM Power
save that replaces the RX
Chain power save options
1.D
Select the
“Save/Apply”
Button.
