VisionNet FS-9510HD, User Manual

Page: 40 / 51

-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Using USALS :
Dish Longitude :
Enter the longitude position of the
antenna using the
NUMERIC
buttons.
Dish Latitude :
Enter the latitude using the
NUMERIC
buttons.
Go To :
Press the
OK
button to rotate the dish to the
selected antenna position.
Positioner Command :
To use various positioner
commands, press the
OK
button. Then, available
positioner commands will appear.
z
Dish Setting :
Press the
OK
button to move to
Dish Setting
menu directly.
z
Service Search :
Press the
OK
button to move to
Service Search
menu directly.
3.3 Service Search
You can select the following search mode.
z
Auto Search Mode :
Satellite :
Press the
OK
button to select the target satellite to be searched.
Search Type :
Select the search type.
Network Search :
You can select Off or On. When you select ‘
On
’, you can find more
transponders using the home network. As it refers to NIT during searching, if there is the
frequency information of other transponder, it searches the other transponder besides the
transponder that the user inputs.
Time Calibration :
You can select ‘Simple’, ‘Full’ and ‘Off’ to get TDT(Time Data Table) from
each TP
Dish Setting :
Press the
OK
button to move to Dish
Setting menu directly.
Positioner Setting :
Press the
OK
button to move to the
Positioner Setting menu directly.
Start Search :
Press the
OK
button to start search.
z
Manual Search Mode :
Satellite :
Press the
OK
button to select the target
satellite for search.
Frequency :
Select the frequency from the list to search.
Symbol rate :
Enter the symbol rate using the
NUMERIC
buttons.
Polarity :
Select the polarity. (
Vertical/Horizontal
)
Search Type :
Select the search type.
Network Search :
You can select Off or On. When you
select ‘On’, you can find more transponders using the
home network. As it refers to NIT during searching, if
there is the frequency information of other transponder, it
searches the other transponder besides the transponder
that the user inputs.
Dish Setting :
Press the
OK
button to move to the Dish
Setting menu directly.
Transmission :
You can select ‘DVB’ and ‘DVB-S2’
Start Search :
Press the
OK
button to start a search
z
Blind Search Mode :
Satellite :
Press the
OK
button to select multiple
satellites.
Frequency :
Set
Auto
to search whole frequency, Set
Manual
to search only desired frequency.
Polarity :
Select the polarity. (
All
Polarity/Vertical/Horizontal
)
Search Type :
Select the search type.
Dish Setting :
Press the
OK
button to move to the Dish
40