96
V
ISIONEER
S
TROBE
XP 300 S
CANNER
U
SER
’
S
G
UIDE
A
CCESSING
THE
TWAIN I
NTERFACE
As previously stated, you can access the TWAIN interface from any
TWAIN compliant scanning application. You can configure any of your
OneTouch buttons to automatically open the TWAIN interface when
you press a button on the scanner.
Below are instructions for accessing the TWAIN interface from
OneTouch and from PaperPort.
Opening the TWAIN Interface from OneTouch
1. Press, hold down, then release the Scan button.
2. When the OneTouch 4.0 Properties window opens, select the
configuration
Configure Before Scan
.
3. Right-click on Configure Before Scan and make sure there is a
check mark next to TWAIN.
4. Click OK to save your changes and close the OneTouch Properties
window.
5. Insert a page into the scanner.