15
MV4 Configuration
7.
Hor Width
: Press ENTER to adjust the image’s width by UP/DOWN button press.
8.
Ver Start
: Press ENTER to adjust the image’s vertical start position by UP/DOWN button press.
9.
Ver Height
: Press ENTER to adjust the image’s height by UP/DOWN button press.
10.
Reset
: Press ENTER to return all the above settings to factory default.
Image Channel Set Up for Picture in Picture (PIP) Mode: (4K30 Only)
1.
Use the UP/DOWN front panel buttons to select the channel to set up and then ENTER:
2.
Input Video
: Press ENTER to change input video source.
3.
Output
: Press ENTER to switch ON/OFF.
4.
Size & Position
: Press Enter to choose the following OSD functions:
5.
Step
: Press ENTER to set up the interval each UP/DOWN button press (step).
6.
Hor Start
: Press ENTER to adjust the image’s horizontal start position by UP/DOWN button press.
7.
Hor Width
: Press ENTER to adjust the image’s width by UP/DOWN button press.
8.
Ver Start
: Press ENTER to adjust the image’s vertical start position by UP/DOWN button press.
9.
Ver Height
: Press ENTER to adjust the image’s height by UP/DOWN button press.
