Vision VR48 4 Series, User Manual

Page: 288 / 352

Vision VR48 Series 4 Router User Manual 288
© 2015 Vision Engraving and Routing Systems
The next window allows for a selection of colors and whether or not to see more or less of the specific
color via sliding the Tolerance level for that color.The Brightness adjustment at the bottom of the screen
can also be adjusted to show more or less of the image. Since we are only interested in the outline of
this image, the only color selected is the default Black color. The Brightness was reduced as much as
possible, without turning the entire area black, then the Tolerance was increased until small speckles of
black were seen around the image. Then the Tolerance was reduced so that those speckles were not
visible. Since the interior of the image is what, it was not possible to completely fill in the interior of the
image with black. This is not a problem as again, we're only interested in the outline of the image. Select
OK to finish the vectorization process.
Once the image has been modified, the follow window will appear giving the notification that the image is
ready to vectorize.. Select OK to close this window.