background image

13

© 2011-2016 KIRAMEK, INC.

System Operation

DIRECT DOOR LOCK

Pressing Button-II & Button-III at the same time for 

a short duration will lock or unlock the doors (if sup-

ported) without Arming or Disarming the security sys-

tem.  The pager will beep once and icons will update as 

shown in Fig-5 below.  

This feature can be useful if you want to lock the doors while someone is 

inside the vehicle.  In such a case, you can temporarily leave the vehicle 

and lock the doors but keep the 1480 from accidentally triggering the siren 

due to someone inside the car. 

TRUNK RELEASE

On most cars that have a dedicated Trunk Release but-

ton on the factory remote, the 1480/1460 and Paging 

System provide another way to remotely open the trunk 

(on compatible cars).  Simply press-and-hold the   but-

ton for about 2s and then release.  You should hear 3 beeps from the pager 

and see the trunk open icon appear on the LCD (as shown on page 12). 

NOTE: If you press for the   button for only 1s or less, you will hear a differ-

ent melody sound signifying a different pager feature: Vehicle Status.

Push Buttons

II

 

&

 

III

Direct Door Lock only works when the 1480 is Disarmed.  If you press 

Buttons II & III while the system is Armed, the security system will 

merely Disarm.  Also, if you lock the doors with this feature and later try 

to Arm, the doors will unlock and the system will be Disarmed—a second 

press will be required to Arm.

       NOTE

Never use this feature to leave unattended children in a car!

       CAUTION!

FIG-5: Pager LCD Icon Change for Direct Door Lock

LOCKED

UNLOCKED

Push the

      Button for 2s

Not available on the 1460.

Not available on some cars.

Not available on some cars.

Summary of Contents for TR537S





























Reviews: