21
© 2011-2016 KIRAMEK, INC.
21
TROUBLESHOOTING
MY PAGER ORIGINALLY WORKED FINE BUT NOW IT DOESN’T.
If you sent your vehicle in for maintenance and/or the battery was discon-
nected, or if substantial noise was present on the 12-volt line in the ve-
hicle, it is possible that transmitter memory could be lost. For this reason
we strongly recommend that the main wire harness of the 1480/1460 be
disconnected BEFORE you disconnect the vehicle’s battery.
•
If the 1480/1460 is Armed, please use your factory remote to Disarm, or
you can your Manual Disarm Code to Disarm (Owner’s Guide page 5).
Then relearn your transmitters as described on page 20 in this manual.
I LOST MY PAGER AND NOW I’M WORRIED ABOUT SECURITY.
Simply relearn the pager(s) you have according to the steps given on page
20. Pager Learning always erases previously learned transmitters from
memory, preventing stolen pagers from Disarming your car.
I SOMETIMES CAN’T LOCK or UNLOCK or START THE ENGINE.
You probably have your VISION Pager on the same keychain as your
factory keyless remote. If so, RF interference between the two remotes
is preventing the factory remote from working. When that happens, it is
very possible you won’t be able to start the engine (on Push Start cars)
or use the Smart Key or Intelligent Key features to Lock/Unlock the car
doors. The solution is simple. Just separate the pager from the factory
remote by at least 10cm (i.e., don’t put them on the same keychain).
I CAN’T TRIGGER THE SIREN WHILE ARMED.
•
Did you Arm with Button-II (Silent Mode)? (See page 7.)
PAGER NOT RESPONSIVE WHEN THE SIREN IS BLASTING.
You may not be able to effectively control your vehicle with the pager
for the first few seconds after the full siren goes off. Simply wait a few
seconds after the siren triggers before pushing transmitter buttons. See
“Responsiveness” on page 6 for more information.
PAGER ICONS ARE STRANGE. PAGER IS ACTING CRAZY.
The pager battery could have leaked. Check battery contacts to ensure
they are clean and not bent. And most importantly, always press trunk
button for 2s before you insert a new AAA battery. (See page 6.)
Summary of Contents for TR537S
Page 27: ...NOTES...
