Vision Multi Axis, Operation Manual

Page: 16 / 41

16 Multi Axis Engraver Operating Manual
(Figure 3.7) Lowering the spindle into the clamp
5)
Loosen the vice slide adjustment screw shown below in figure 3.8.
(Figure 3.8) The vice slide adjustment screw
6)
Push the clamp assembly forwards or backwards to align the spindle up in the center of the clamp. Once the clamp is
centered around the spindle, tighten the vice slide adjustment screw.
7)
Press the goto home button on the Vision Series 3 Controller. The spindle will move up to the z home position.
8)
Press the 4th Axis button on the Vision Series 3 Controller. The spindle will now move to the back left corner of the
table.
9)
When you send a job to the engraver from Vision or Vision Pro, make sure that you select the MaxF Engraver or
Max Flat Engraver machine driver. Using a driver other than these may result in the object not engraving properly.