Page
6
/
15
5.
Cable
Connection
•
Dome Cover
Do not detach protection vinyl from dome cover before finishing all
installation process to protect dome cover from scratches or dust.
•
DIP Switch
Sets up camera ID and protocol.
•
Drop Prevention
Spring
This part keeps the camera from dropping during installation and
maintenance. After install the Bracket, please, hang the spring to
the drop prevention hook of main body as shown in picture for
further tasks.
•
Mounting Screw
Hole
This hole is for screws that assembles the main body with a
bracket.
•
IP Reset Switch
Reset its network configuration to the factory defaults. You will lose
all data that had been entered previously. To initialize the system
to the factory default, press the reset button for more than 5
seconds.
•
LAN Port
Used for the Ethernet connection
•
Audio Port
Used for the audio in/out connection.
•
Video (BNC)
Used for the composite video out or HD-SDI video out connection
according to models
•
Main Connector
Used for the power wire, the RS-485 communication cable, alarm
in/out connection cable.