46
CHAPTER 5: PART REPLACEMENT GUIDE
5.21 Drive Axle Set Replacement – Continued
10) Daub the right side of the bearing housing section of the frame with a fixative (Figure M).
11) Use a mallet to hit the drive axle assembly until it is close to the frame (Figure N).
NOTE:
Be sure to install the nuts from Step 5 onto the new drive
axle assembly to protect the axle prior to completing this step.
FIGURE M FIGURE N
12) Install the bearing into the left side of the frame.
13) Reverse Steps 1 - 3 to complete installation of a new drive axle set.
14) Test the bike for function as outlined in Section 5.24.
