Date of last revision: 2.06
ENGINEERING
GUIDES
TREADMILL.PREMIERENG.REV2
7
USER ENGINEERING MODE
(Models T9700S, T9700HRT, & PREMIER Only)
Your Treadmill offers a User Engineering Mode that can access certain data and help to troubleshoot your Treadmill.
User Engineering Mode is designed for you to access functions that will not affect important Treadmill settings. To
access this mode please hold down
“SPEED DOWN”
and
“SELECT”
for 5 seconds while the Treadmill is in any state
of setting up a program.
""UUSSEERR EENNGG""
displays in the alphanumeric window. Press
“SELECT”
. To access the data press
either set of arrow keys to scroll through the available data/functions. To select the data/function, press and hold
“SELECT”
. To exit, press
“STOP”
.
P6 - UNITS
P6 represents units, English or Metric. You can select this configuration for your Treadmill. The Treadmill configuration
appears in the dot matrix. If
““MMII””
is shown, the Treadmill is configured in English units (miles/mph);
““KKMM””
represents a
Metric configuration (kilometers/kph). Press the SPEED arrows to toggle between English and Metric.In order to save
the modified value, press and hold
“SELECT”
. Note that changing units does affect the stored value of weight and
clears any stored user programs. Changing units may also require you to perform
auto-calibration.
P7 - MAX TIME
P7 represents maximum time. You can modify the time by using either set of arrow keys. Press and hold
“SELECT”
to
enter.
P8 - DEFAULT WEIGHT
P8 represents default weight. Weight appears in the alphanumeric window. To modify weight, press the SPEED arrow
keys. To save the new default weight, press
“SELECT”
prior to exiting. If Units is modified immediately prior, weight defaults
to 150 lbs. or 68 kg.
P9 - ACCUMULATED TIME
P9 represents accumulated time, in hours. This information can not be modified. To exit, press
“STOP”
.
P10 - ACCUMULATED DISTANCE
P10 represents accumulated distance, in either miles or kilometers. This information can not be modified. To exit, press
“STOP”
.
P14 - PAUSE TIME
P14 represents pause time. You can modify the pause time from 20 seconds to 10 minutes by using either set of arrow
keys. Press and hold
“SELECT”
to enter.
P15 - DEFAULT TIME
P15 represents default time. You can modify the default time from 10–99 minutes by using either set of arrow keys.
Press and hold
“SELECT”
to enter.
P16 - DEFAULT AGE
P16 represents default age. You can modify the default age by using either set of arrow keys. The default age is 40.
Press and hold
“SELECT”
to enter.
Premier Upper Board: Engineering Guide
