pictor® N
Operation
20
© Vision & Control GmbH 2017
170
119_99
6.1 Connecting Ethernet Cable
The following steps must be carried out in an electrically dead state.
1. Insert the 6-pin Hirose socket of the Ethernet cable into the LAN plug on
the device.
2. Connect the RJ45 plug to a free Ethernet interface on the host computer
or the network.
6.1.1 Pin Assignments
Properties
• Ethernet interface: The pictor
®
N is integrated in a LAN and interface for
process communication and for parameterization by means of the
operating software in the connected state.
• LAN: 10/100 Mbps.
Pin
Designation
Description
1
TX-
transmission data +
2
TX+
transmission data +
3
NC
Not connected
4
NC
Not connected
5
RX-
received data -
6
RX+
received data -
1
6
2
3
4
5
View: Plug to camera
