Visiomed - LX-360 - 122015
Visiomed - LX-360 - 122015
22
23
Recommended separation distances between portable and mobile RF communications equip-
ment and the equipment or system - for equipement and systems that are not life- supporting.
The model
LX- 360
is intended for use in an electromagnetic environment in which radiated RF distur-
bances are controlled. The customer or the user of the model
LX-360
can help prevent electromagnetic
interference by maintaining a minimum distance between portable and mobile RF communications
equipment (transmitters) and the model
LX-360
as recommended below, acording to the maximum
output power of the communications equipment.
Rated maximum output
of transmitter
Separation distance according to
frequency of transmitter m
80 MHz to 800 MHz
d =
[ 3.5
E
1
P
]√
800 MHz to 2.5 GHz
d =
[ 7
E
1
P
]√
0.01
0.12
0.23
0.1
0.38
0.73
1
1.2
2.3
10
3.8
7.3
100
12
23
For transmitters rated at a maximum output power not listed above the recommended separation distance d in me-
ters (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum
output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
Note 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
Note 2: These guidelines may not apply in all situations. Electromagnetic propagations is affected by absorption and
reflection from structures, objects and people.
IX. NOTES
- The glass protecting the lens is the most important and most fragile part of the thermometer, so be
careful with it.
- Clean the glass with a cotton cloth, dampened with water or 70% alcohol.
- Only use the recommended batteries, do not recharge non-rechargeable batteries, do not burn them.
- Remove the batteries if the thermometer is not to be used for a long period.
- Do not expose the thermometer to direct sunlight or to water.
- A shock may damage the thermometer.
X. ACCESSORIES
User manual, Warranty card, Base, Batteries (LR03).
XI. TROUBLESHOOTING
If you have one of the following problems while using your
THERMOFLASH® LX-360
, please refer to
this breakdown service guide to help resolve the problem. If the problem persists, please contact our
customer service at +33 892 350 334.
- The screen is showing temperatures higher than 95°: the temperature is in Fahrenheit. Change the
measurement unit to Celsius by pressing the Program setting button to get
F1
function key.
- The screen is showing temperatures lower than 32°C (89.6°F): to take the internal temperature of
your body, choose the
BODY
function. If you are in
SURFACE TEMP
or
ROOM
mode, the 32°C temperature
displayed is showing the external temperature that your body releases.
EMC data
Guidance and manufacturer’s declaration - electromagnetic immunity - for equipment and sys-
tem that are not life-supporting. The model
LX-360
is intended for use in the electromagnetic envi-
ronment specified below. The customer or the user of the model
LX-360
should assure that it is used in
such an environment.
Immunity
test
EN
60601
test
level
Compliance
level
Electromagnetic
environment - guidance
Conducted
RF
3 Vrms
N/A
Portable and mobile RF communications equipment should be
used no closer to any part of the model
LX-360
, including cables,
than the recommended separation distance calculated from the
equation applicable to the frequency of the transmitter.
Recommended separation distance:
d =
[ 3.5
E
1
P
]√
80 MHz to 800 MHz
d =
[ 7
E
1
P
]√
800 MHz to 2.5 GHz
where P is the maximum output power rating of the trans-
mitter in watts (W) according to the transmitter manufacturer
and d is the recommended separation distance in meters (m).
a
Fields strengths from fixed RF transmitters, as determined by an
electromagnetic site survey, a should be less than the compliance
level in each frequency range.
b
Interference may occur in the vicinity of equipment marqued
with the following symbol:
IEC
61000-4-6
150 kHz
to 80
MHz
Radiated RF
3 V/m
3 V/m
IEC
61000-4-3
80 MHz
to 2.5
GHz
Note 1: At 80 MHz and 800 MHz, the higher frequency range applies.
Note 2: These guidelines may not apply in all situations. Electromagnetic is affected by absorption and reflection from
structures, objects and people.
a. Fields strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land
mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoretically with
accuracy. To assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey
should be considered. If the measured field strength in the location in which the model
LX-360
is used exceeds the
applicable RF compliance level above. The model
LX-360
should be observed to verify normal operation. If abnormal
performance is observed, additional measures may be necessary such as reorienting or relocating the model
LX-360
.
b. Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3V/m.
