Serial Communication
Setting Port Output
VT300 Technical Manual, Rev. A4
45
Doc
#
TM-VT300-EN
6.2.2
Setting Port 2 Output
You can use menu path
SYSTEM
>
SET
>
2COM
>
OPERATION
to determine the
output for port 2. The following options are available:
W.OUT
– continuous weight output. See section
6.3.1.
W2OUT
– continuous weight output with dual scale operation. See section
6.3.2.
A.OUT
- continuous weight output with tare. See section
6.3.3.
NONE
– Port is disabled.
EDP
– EDP protocol output. See section
6.3.6.
R.PRN
– printing data from the local printer on a remote printer. See section
6.3.7.
M/S A-Y
[A=network address] – participate in a network of several indicators as
slave, with this address. See section
6.3.8.
The
2COM
menu has additional parameters related to port 2 output, detailed below.
Parameter Description
Values
PARITY/DATA
Parity bits.
Specifies whether there should be even parity with
7 data bits (E7), no parity with 7 data bits (N8) or no parity with
8 data bits (E8).
E7, N8, E8
PRN TYPE
Printer type.
Specifies which type of printer is connected to the
indicator: Epson FX (EP-FX or other similar serial printer) or TM-
295.
EP-FX, TM-295
ERROR CTRL
Printer error display.
YES specifies that printer errors (DTR) should be displayed and
acknowledged by the user.
NO specifies that errors should be ignored. You must set this
parameter to NO for communication with a PC.
YES, NO