MB-3 USER INSTRUCTION MANUAL
17
uploading phonebook entries under Object Push Profile (OPP) mode (see
Section 4.2
Manually Upload Phonebook
for further information).
Phonebook sync speed varies between phone models and size of the phonebook. For some
phones, the synchronization to MB-3 is almost instant but for others it may take longer.
The transfer from MB-3 to Comand APS may take a while depending on the phonebook size.
Once transfer is completed you will be able to see the phonebook entries when accessing the
Phonebook screen.
Contacts are sent in the order according to the phone's memory slot distribution via Bluetooth.
Different head units will have different way of sorting the phonebook nonetheless, you will be
able to quickly access the contact entry you desired by searching through the alphabetic index.
Auto sync will only sync the phonebook entries stored in phone memory. If you wish to sync
the phonebook stored in the SIM card please copy the contact entries to your phone memory
and sync again (by disconnecting and reconnecting your phone with MB-3).
Depending on the Comand system, for each paired phone you will be able to transfer up to
1000 or 650 entries to the Comand APS console from MB-3. Therefore, if you have 4 paired
phones you can upload up to a total of 4000 phonebooks. If your phone has more than 1000
entries Command APS will randomly pick up 1000 entries to be displayed on your screen. For
further information regarding the phonebook management in the Comand APS console please
contact your vehicle manufacturer or refer to the car manual.
4.2 Manually Upload Phonebook
Not all phones support automatic phonebook sync, therefore, if your phone
does not support this function you will need to send the required contact
entries manually from your mobile phone to MB-3 under the Object Push
Profile (OPP) mode.
To Send contact entry:
1. Press the
middle key
[MENU]
to enter the menu.
2. Press the
right key
[
]
to select
[SEND CONACT]
.
3. Press the
middle key
[OPP]
to activate OPP mode.
4. Access your phonebook on your phone now and go to
the required contact entry.
5. Choose
Option
on your phone screen and select
Send
via Bluetooth
(or similar term) and select MB-3 as the
device to transfer the contact to.
6. Repeat the Step 4 and 5 for other entries if necessary.
7. Once you have finished, press the
middle key
[OK]
to
A2DP
FM3 106.1 MHz
FM> MENU
BLUETOOTH
SETUP
SEND CONTACT
OPP
