MB-3 USER INSTRUCTION MANUAL
16
4. Phonebook Function
4.1 Sync Phonebook
If your phone supports the phonebook sync protocol provided by MB-3 you
will be able to take the advantage of the automatic phonebook upload
function. The phonebook sync process is divided into two stages:
1.
From phone to MB-3.
2.
From MB-3 to Comand APS console.
As soon as your phone is connected with MB-3 it will upload contacts in your
phone memory to the MB-3’s memory. When this is completed MB-3 will then
transfer the contacts to the Comand system. This will cause a
temporary
disconnection
between MB-3 and Comand system (you will see a message
such as ‘Insert Telephone’ or ‘Phone not available’, etc. on the screen) please
just wait until the connection comes back. As soon as the connection is
reinstated MB-3 will begin to transfer the contacts from MB-3’s memory to
your Comand system and you can check whether the transfer is done by
accessing the phonebook function on the Comand system to see if the contact
emerges.
To access your phonebook:
1.
Press
TEL
button on the Comand APS console.
2.
Press
Phonebook
button on the Comand APS console.
3.
Search the name using the navigation buttons on your Comand system.
4.
Press the
answer button
on the Comand system to dial a call to the
selected contact.
Note:
Some phones may not support automatic phonebook synchronization. If your phone does not
synchronize after establishing the connection with MB-3 please first of all, check if MB-3’s
Phonebook Sync function is ON (see
Section 4.4 Phonebook Setting
for further information).
If this function is already on and you are still unable to sync it is very likely that your phone
does not support MB-3 phonebook sync protocol. You can check your phone model against
MB-3’s compatibility list available at ViseeO’s website. Alternatively, you can try manually
