Viscount Vivace 90, User Manual

Page: 75 / 124

73
Viscount Vivace 90 - 90 Deluxe Owner’s Manual
The four fields displayed correspond to the organ’s three sections. The number alongside identifies the
transmission and reception channel for the section concerned.
As usual, use the [FIELD
] and [FIELD ] buttons to locate the cursor on the display fields and
[VALUE +] and [VALUE -] to select the channel required.
Now press [EXIT] to return to the MIDI menu and save the settings made.
8.2 PROGRAM CHANGE MESSAGE TRANSMISSION
The MIDI Program Change (PG) message allows a specific sound or program (patch) to be recalled in a
connected unit. Therefore, you can use this function to select the voice required from a remote module
(such as an expander) connected to the [MIDI OUT] port directly from the organ itself.
To display the relative video page, select the SEND PROG. CHANGE field in the MIDI menu and press
[ENTER]:
To transmit a PG message, locate the cursor on the section to which the MIDI channel of choice is
associated and use the [VALUE +] and [VALUE -] buttons to set the number of the PG required.
o
TX/RX FILTER: MIDI filter setting.
Use the [FIELD ] and [FIELD ] and [ENTER] buttons to select the function required.
Otherwise, press [EXIT] to exit the MIDI submenu and return to display of the MENU screen.
8.1 SELECTING THE CHANNELS
To set the MIDI transmission and reception channels, select the TX/RX CHANNEL field in the MIDI
submenu:
N.B.
- It is not possible to set different reception and transmission channels for the same section.
- MIDI 16 channel cannot be selected since it is the system channel used for the exchange of
internal codes between Viscount instruments.