Viscount Vivace 90, User Manual

Page: 49 / 124

47
Viscount Vivace 90 - 90 Deluxe Owner’s Manual
The Enclosed and Automatic Pedal can also be saved in the general memories and HR and in the Tutti
only, by activating the specific function, see par. 7.8.
For the fixing combinations procedure, see point 3.
3. [S] piston: “
Set” (or fix) function used for fixing combinations. To fix a combination, simply press
the [S] piston, keep it pressed and then press the combination you wish to fix, which may be dedicated,
general or Tutti.
WARNING!
The [S] piston displays the on-off status for enabling of setting of the combinations, the Tutti and the
Crescendo setups, and access to the organ’s setup (LOCK ORGAN function, see point 9.2).
When the light in the piston is on, the functions listed above are enabled; when the light is off, the
organ’s sound setup cannot be modified, and only the parameters shown in the main screen can be
edited.
4. Pistons [P]: these pistons activate the couplings of the manuals with the pedal board, as follows:
o
[P]
(4A): coupling of the third manual with the pedal board (III/P).
o
[P] (4B): coupling of the second manual with the pedal board (II/P).
o [P]
(4C): coupling of the first manual with the pedal board (I/P).
5. [NEXT] and [PREV.] stops: general combination sequencers. [NEXT] selects combinations in
ascending order, [PREV.] in descending order.
6. Second manual couplers: these pistons control the status of the Man.II couplings, as follows:
o
[III]:
coupler of the third manual to the second
o
[I]: coupler of the first manual to the second
7. [II] Piston:
activates coupling of the third manual to the first (III/I).
8. [MIDI I], [MIDI II], [MIDI P] and [MIDI III] pistons: this section contains the pistons used to
activate the transmission of MIDI note codes on the [MIDI OUT] port (in the recess on the left
underneath the first manual) in response to the notes played on the manuals. The LED of each piston
displays the status of transmission on the manual’s MIDI channel as follows:
o
Piston illuminated: note code transmission enabled
o
Piston off: note code transmission disabled
NOTA
- Questi pistoncini attivano o meno la trasmissione esclusivamente dei codici MIDI di nota (Note
On e Note Off). Tutti i restanti messaggi MIDI previsti dall’organo vengono sempre trasmessi
indipendentemente dallo stato della funzione in oggetto.
- Questi pistoncini controllano la sola trasmissione delle note MIDI. La ricezione è sempre abili-
tata.