22
Viscount
UNICO
8
-
7
/
/
User Guide
the screen comprises four sections:
o
MODE:
selects the type of wind-chest from:
-
C – C#
(alternate keys)
-
MONO
-
DOUBLE CUSP
-
CUSP
-
DOUBLE WING
-
WING
o
FROM
and
TO:
they select the limits of the area, set in outputs, within which the wind-chest is to be
located. The value is set as [output number-position between two outputs], bearing in mind that there are
four positions between one output and the next (2-4-6-8 on the display).
A value of 20 means that the end of the range (FROM or TO) is on output [2]; a value of 32 means that
the FROM or TO point is between output [3] and [4], close to [3] since it is in the first fifth of the area
between output [3] and output [4].
The screen shown above refers to a peaked wind-chest placed between output [1] and a position between
outputs [3] and [4].
o
[position indicator]:
it consists of small rectangles located above the drawing of the wind-chest and
indicates that the zone is displaying the part below the total number of outputs.
o
[wind-chest on outputs]:
in the bottom of the screen, it provides a graphic illustration of the wind-
chest with the references to the outputs being used, to give an immediate picture of its position and the
outputs which will carry the notes, in accordance with the wind-chest configuration.
To view the setup of another stop, simply activate the draw-stop / tab or press [EXIT] to quit the function.
In both cases the set-up just created is saved automatically.
