viscount Jubilate 230-232-235-245
JUBILATE 230 - 232 - 235 - 245
27
the same as the one that generated them. Such messages include BULK DUMP instructions for
programming the unit. These instructions contain programming parameters normally saved in
a memory location. They are used to transfer the above mentioned parameters from one unit to
another of the same type, or may be saved in an external memory, for example in a computer or
sequencer from where the data can be recalled should it be accidentally lost or erased.
Right side panel
7. Pitch (General): Allows the whole instrument tuning to be adjusted. When your organ is delivered
it has been factory tuned to A = 440 Hz (the pitch adjuster is set in the central position).
8. Input L (MONO) - R: Organ amplification input. When inputting a mono sound source use the
L(MONO) socket.
9. Output L(MONO) - R: Non amplified organ output. These sockets are generally used to connect
up to external powered speakers or to record directly into analogue recording equipment such as
cassette recorders. When connecting to equipment which only takes a mono signal use the L(MONO)
socket.
10. Headphones: Output for stereo headphones. With headphones inserted the organ’s internal
amplification is automatically cut off.
7. RESET - LOCAL OFF
RESET
In case of malfunctioning of the instrument and before calling for service, please effect foollowing
reset procedure: press buttons HR, 1 and 2 of general memories and pressed switch organ on. After
a few second, release the pressed buttons.
VOICE LOCAL OFF
If the Juilate organ is piloting an external sound generator by MIDI, it may be necessary to switch
one or mode voices to “LOCAL OFF” mode. When a voice is in “LOCAL OFF” mode, when its
register is operated, only the MIDI code will be emitted, without activating sound generation (the
voice is mute). To set one or more voices in “LOCAL OFF” mode, press the SET (S) push-button
under the first manual and keep it pressed while pressing the CANCEL (C) push-button also under
the first manual. When this is done, alla the lamps of the enabiled voices will illuminate; the selector
can be also used to disabiled LOCAL OFF, or enabile normal operation of the individual voices.
Remember that in this operating mode, when the light of the selector is off, voice generation is
disabled. Press the SET+CANCEL keys again to return to normal operation.