ViSAGE VIS0483, User Manual

Page: 9 / 11

Visage Lighting & Effects www.batmink.co.uk
DIMMER MODE
Press “ MODE ” button select the manual dimmer colour select mode. The display will show
red as r.000 – r.255 , press the “ SET UP ” to choose the different colours as shown in the
above table, ie green G.000 - G.255 etc, then press the “ UP ” and “ DOWN ” button to set the
dimming rate 0-255.
Colour temperature can be selected by pressing the “
MODE ” button until the display shows
“ Cr.00 – Cr.08 ” then press the “ UP ” and “ DOWN ” buttons to select from the eight available
colours.
The Flash speed can be changed by selecting “
MENU ” until the display shows “ F5.00 –
F5.15 , you can press the “ UP ” and “ DOWN ” button to select from the 15 available flash
speeds.
SOUND ACTIVE MODE
There are two selections in this mode, one for sound activation and the second for sound
sensitivity.
Press “
SET UP ” button until the display shows “ So01 - So16 ”, then press the “ UP ” and
“ DOWN ” button to select from the sixteen different sound modes.
To select the Sensitivity, press the “ SET UP ” button until the display shows SJ-1 – SJ-8 , then
press the “
UP
and
DOWN
buttons to select, 1 is sound sensitivity off, no 2 is the lowest
sensitivity and 8 is the highest.
AUTO RUN PROGRAM MODE
Press MODE button and select the auto programs, there are three available which can be
selected by pressing “
SET UP
”.
Colour Fade (dreaming) mode; Press
SET UP
until the display shows
AF01
to
AF16
, then
press the
UP
and
DOWN
button to select from the sixteen available programs.
Colour Jumping; Press
SET UP
until the display shows
AJ01
to
AJ16
, then press the
UP
and
DOWN button to select from the sixteen available programs.
Auto Fade and Jumping Mode; Press SET UP until the display shows A-JF the fade mode and
jumping mode will continuously operate one after the other. The UP and DOWN buttons do
not work in this mode.
Auto Fade/Jump Speed control; Press
SET UP until the display shows SP01 to SP16 , then
press the UP and DOWN button to select from the sixteen available speeds, 1 being the
slowest and 16 the fastest.
STATIC COLOUR SELECTION
Press the MODE button until the display shows CL.** , there are two different modes, colour
selection and flash speed.
Static Colour select; Press “
SET UP ” button until the display shows CL.00 – CL.63 , then press
the UP and DOWN to select from the 63 colours available.
Flash Speed select; Press “ SET UP ” button until the display shows F5.00 – F5.15 , then press
the UP and DOWN to select from the 15 speeds available.
OTHER PROGRAM FUNCTIONS
Display ON/OFF mode; when this mode is engaged the display will switch off after 60
seconds after the last operation.