Visage Lighting & Effects
www.batmink.co.uk
Lime Green colour. You can also press the FS/SP button to turn on/off flash effect and use
the + and – buttons to adjust the speed.
Setting DMX Mode using IR Remote
Press
CH
button to switch between DMX address set mode and DMX channels set mode.
Each press of this mode will change to the next mode.
1.
When the Multipar goes into the DMX address set mode, you can press + or – to select
the DMX address.
2.
When the Multipar is in the DMX channel set mode, you can press + or – to select the
DMX channels.
Setting DMX Address using IR Remote
.
Press the button to set the DMX address (
A
) the red, green, blue, white, amber and UV
lights will flash 2-3 times.
Input the three address number for example 123. When the red light is on put in the first
number “1”, after this the green light will be on and input the second number “2”, after this
when the blue light is on input the third number “3”. After you have inputted all three
numbers all the LED’s will flash 2-3 times and the address is accepted. If the address is
incorrect then the red light will remain on. A new DMX address should then be inputted.
Black out mode.
Press “Black OUT” to set the lights power on or off by pressing the button.
SPECIFICATIONS
Weight:
4.8Kg
Dimensions:
370mm x 270mm x 220mm
Power input
: AC 100v-240v/50Hz-60Hz
Wattage
: 215watt
LED’s
: 18 pieces of 25watt RGBAW+UV+Lime Green (7in1)
Beam Angle
: 18 degree
Connection Mains
: Power con in and out sockets
DMX Connection
: 3 Pin Female and Male XLR
Features:
Built in Microphone
Four Button LED Display
IP Remote Control operation
Power cord daisy chain fixtures
: maximum 3 fittings
LIGHTING products are distributed in the UK by
Website:
www.batmink.co.uk
E-Mail:
Telephone: 01458.833186
