Visage Lighting & Effects
www.batmink.co.uk
•
Please handle the power cord with care. Never modify, bend, strain mechanically, put
pressure on, pull or heat up the power cord
•
If an extension cord is required, make sure that the core diameter is sufficient for the required
power consumption of the device
•
Always disconnect from the main power source when the device is not in use or before
cleaning it
•
Please ensure you keep this device clean and in good condition. If the power plug or the device
is dusty, the device must be taken out of operation, disconnected then be cleaned with a dry
cloth. Dust may reduce the insulation which could cause an electric shock. More severe levels
of dirt in the device should be removed by a specialist
•
Please ensure you keep this device away from liquids or fluctuating temperatures that may
cause condensation. If the device is on contact with any liquid, please disconnect the device
from the main power source immediately and leave to dry out before using again. If there is
any damage to the device please consult a specialist
HEALTH WARNING
Never look directly into the light source as this may cause damage to eyes.
Keep away from children and amateurs.
Never leave this device running unattended.
OPERATING & INSTALLATION CONSIDERATIONS
•
This product is only allowed to be operated with an alternating voltage of 90V/240V,50/60 Hz
and was designed for indoor use only. This device is designed for professional use (e.g. on
stage in discotheques, theatres etc.)
•
Please do not leave this device running for longer than recommended to ensure the device
operates efficiently for future use
•
If used in conjunction with a smoke machine make sure that the device is never exposed to
the direct smoke jet and is installed in a distance of 0.5 meter between the smoke machine
and device
•
The ambient temperature must always be between –5ºC and +45ºC
•
The relative humidity must not exceed 50% with an ambient temperature of 45ºC.
•
This device must only be operated in an altitude between -20 and 2000 m over NN
•
The minimum distance between light-output and the illuminated surface must be more than
0.1 meters.
•
This device is only allowed for an installation via mounting bracket. In order to safe guard
sufficient ventilation leave 50 cm of free space around the device.
•
The installation of the device must be built and constructed in a way that can hold 10 times
the weight for 1 hour
•
When installing the device, make sure there is no highly flammable material (i.e. decorations)
within a minimum of 0.5m
