Automatic overheat protection
15
9. To unwind the strand of hair again, push the direction of the rotation switch to the
opposite direction as you would when winding the strand of hair.
10. Repeat the process for all strands of hair.
11. To switch off the product, slide the function switch to the
0
position.
12. If you no longer wish to use the product, pull the mains plug out of the socket.
13. Let the product cool down completely.
14. Clean the product as described in the chapter ‘Cleaning’.
Styling tips
Observe the following notes for successful styling:
− For maximum volume, first let the brush head rotate at the hairline for a few
seconds.
− Use the large volume brush adapter
2
if you want plenty of volume.
− Use the small round brush adapter
7
to curl your hair.
− To curl your hair, wind your hair around the brush adapter several times.
− Use the cold air function to fix the curls before you unwind them from the brush
adapter.
− To create waves to the inside or outside, only wind the ends of your hair around
the brush adapter.
Automatic overheat protection
The product has built-in overheat protection. If the product automatically switches
off and cannot be switched back on again, overheat protection may be activated.
Proceed as follows:
1. Set the function switch
4
to the
0
position (see
Fig. B
).
2. Pull the mains plug out of the socket.
3. Let the product cool down completely.
4. Clean the air intake and air outlet
5
as described in the chapter ‘Cleaning’.