1717 W Civic Drive, Milwaukee, WI 53209
414-354-6600
Design Modification Rights Reserved
© 2018 Visa Lighting
When using electrical equipment, basic safety precautions should always be followed, including the following:
•Read all instructions carefully before installing and save for future use.
•Make sure all connections are in accordance with the National Electrical Code and local regulations.
•To avoid possible electric shock, be sure the power supply is turned off before servicing or installing the fixture
•Service should be performed by qualified personnel.
•These instructions may not cover all details or variations. If additional information is needed, please contact Visa Lighting.
!
Publication 762302XX Rev: A – June 2018
Model: CV2424
Linesse Linear Slot
Publication: 762302XX
Document Description: Installation Instructions
for 3” Linesse Linear Recessed
Series Luminaires
10
INSTALLATION INSTRUCTIONS FOR POWER FEED
Insert building power feed using conduit into the fixture feed
hole or a 2x4 Junction box (supplied by others). Start with the
first fixture and splice wiring according to the wiring diagram
below. A starter harness must be used to connect to the
through harness that will supply power to adjoining fixtures.
Building Power Feed
Starter Harness
Through Harness
LINE WIRE COLOR
CIRCUIT DESCRIPTION
BLK
CIRCUIT A—HOT
WHT
CIRCUIT A & B– NEUTRAL
RED
CIRCUIT B– HOT
GRN
GROUNDING
VLT
DIMMING CONTROL 1
GRY
DIMMING CONTROL 2
ORG
EHS or EHF—HOT
WHT/ORG
EHS or EHF– NEUTRAL
GRN - GND
GRY - DIM -
VLT - DIM+
BLK - HOT
WHT - NEU
GRN - GND
GRY - DIM -
VLT - DIM+
BLK - HOT
WHT - NEU
LINE-IN
FIXTURE
General Wiring Diagram
For special circuitry consult factory
