USER MANUAL
07
FIG. 07
1
7.
As shown in Figure 7, re-lock the cushion block (38) and hexagon socket head cap screws
M6*16(39) removed in Step 5 into the slide rail with hexagon wrench #5(75).
(75)
(38)
(39)
Figure 7
8.
Install the PU roller (H) 2PCS, nylon nut (5)2PCS, flat washer (7)8PCS and hexagon socket
head screw (21)2PCS in the parts tray, and install the PU roller (H) on the track as shown in
Figure 8 by using hexagon wrench #5(75) and cross wrench (77), and do not lock the roller too
tightly, so as to make the roller.
(75)
(77)
(21)
(7) (H)
(5)
Figure 8
75
38
39
FIG. 08
1
7.
As shown in Figure 7, re-lock the cushion block (38) and hexagon socket head cap screws
M6*16(39) removed in Step 5 into the slide rail with hexagon wrench #5(75).
(75)
(38)
(39)
Figure 7
8.
Install the PU roller (H) 2PCS, nylon nut (5)2PCS, flat washer (7)8PCS and hexagon socket
head screw (21)2PCS in the parts tray, and install the PU roller (H) on the track as shown in
Figure 8 by using hexagon wrench #5(75) and cross wrench (77), and do not lock the roller too
tightly, so as to make the roller.
(75)
(77)
(21)
(7) (H)
(5)
Figure 8
75
77
5
7 H
21
