VirtuFit Row 1000 Rowing Machine
7
EN
STEP 1
ENG
6
VirtuFit Water Resistance Row 1000
ASSEMBLY INSTRUCTIONS
Open the box and remove all parts from the packaging and place them on the floor.
Missing parts: If you think you are missing certain parts in your package, carefully check the styrofoa and
the treadmill. Some parts (bolts, screws, etc.) are already attached to / in the treadmill.
Error message: Make sure that all cables are carefully attached. The aluminum legs are very sensitive and
should remain straight. Do you get an error message after mounting your rowing machine? Then you
should bend these copper feet straight again, this may cause the error message to disappear.
Allen bolts: Make sure that the Allen key fits securely into the bolt before you apply force to the key. In
this way you prevent the head of the socket head from being turned.
STEP 1
-
Turn over the Slide Rail (3), the Rear Stabilizer (2) and the seat (38) as above picture;
-
Install the slide rail (3 L/R) into the seat;
-
Attach the Rear Stabilizer (2) to the Slide Rail (3), tighten with 4 Washers (68) and 4 screws (57).
Missing parts: If you think you are missing certain parts in your package, carefully check the styrofoa and
the device. Some parts (bolts, screws, etc.) are already attached to/in the device.
Error message: Ensure that all cables are carefully attached. The aluminum legs are very sensitive and
must remain straight. Do you receive an error message after mounting your device? Then you have to
straighten these aluminum legs again, this may cause the error message to disappear.
Socket screws: The device contains socket screws, make sure that the allen key is firmly in the
bolt before you apply force to the key. In this way you prevent the head of the socket head screw from
being rotated.
• Turn over the Slide Rail (3), the Rear Stabilizer (2) and the seat (38) as above picture.
• Install the slide rail (3 L/R) into the seat.
• Attach the Rear Stabilizer (2) to the Slide Rail (3), tighten with 4 Washers (68) and 4 screws (57).
ASSEMBLY INSTRUCTIONS
