ENGLISH
EN
08
INDEX
Safety
instructions
07
Guarantee 07
Assembly instructions
07
Adjusting
08
Training with heart rate
08
Maintenance
08
Troubleshooting
09
Console
09
Training
guidelines
10
SAFETY INSTRUCTIONS
WARNING!
Consult your doctor before you start exercising. This is particularly
important for people with health problems. Please read all
instructions before using the machine. VirtuFit assumes no
responsibility for injury or property damage resulting from the
use of this equipment. Please read this manual carefully before
assembling and/or using the machine.
• Make sure that the machine is properly assembled and that all
nuts and bolts are tight before using it.
• Lubricate all moving parts annually with petroleum jelly (acid-
free) or silicone spray.
• Do not wear loose clothing to avoid getting caught in moving
parts.
• Install and use the unit on a solid, level surface.
• Always wear clean sports shoes when using the appliance.
• Keep children and pets away from the appliance when in use.
• Maintain your balance when using the device.
• Do not place your fingers or other objects in the moving parts.
• Before exercising, consult your physician to determine the
appropriate frequency, duration and intensity of exercise for
your age and physical condition. Stop exercising immediately
if you experience nausea, shortness of breath, fainting, headache,
chest pain, tightness or any other discomfort.
• Do not hold the machine by the seat when moving.
• This machine should only be used by one person at a time.
• This machine is designed for domestic use and the maximum
user weight is 135 kg.
• Leave 1-2 metres of space behind the machine to avoid accidents.
• Place the machine on a clean, flat surface. Do not place it on a
thick carpet, as this may hinder the ventilation of the machine.
Do not place the machine outdoors or near water.
• Keep the storage area dry, clean and level to prevent damage.
Do not use the device for any purpose other than training.
• Use the device only in an environment where the ambient
temperature is between 10°C and 35°C. Store the device only in
an environment where the temperature is between 5°C and
45°C.
GUARANTEE
Warranty claims are excluded if the cause of the defect is the result
of:
• Maintenance and repair work not carried out by an official
dealer. Unless otherwise specified by the supplier or
manufacturer.
• Improper use, negligence and/or poor maintenance.
• Failure to maintain the appliance in accordance with the
manufacturer’s instructions.
ASSEMBLY INSTRUCTIONS (STEP 01-04)
Missing parts:
If any parts are missing from the packaging, carefully
check the polystyrene foam and the appliance itself. Some parts (bolts,
screws, etc.) are already attached to the unit.
Error message:
Make sure that all cables are carefully attached. The
aluminium feet of the console are very sensitive and must be kept
straight. If the console gives an error message after the machine
has been mounted, the aluminium feet of the console may be bent.
Straightening the aluminium feet may make the error message
disappear.
Hex head bolts:
Make sure that the hex head spanner is pushed into
the bolt before applying force. This will prevent the head of the socket
bolt from turning.
Summary of Contents for Etappe 1
