DISASSEMBLY
™
OPENING SHELL
//
To open the Spire III shell simply press the lock button on the back of
the Spire III. The top shell is spring loaded and will automatically lift
up to the open position. To close just press down until there is a click
sound.
REMOVE
+
INSTALL SPIRE TRAY
//
Open the top shell first. Then locate the Tray Release Tab on the back
the Spire tray. Push forward as indicated by the arrow on the lock and
then pull the body tray up and out of the shell. To reinstall first align
the front of the body tray under the front support inside the front of the
loader. Then push down on the tray until it securely locks in place.
REMOVING LID
+
INSTALLING SPEED FEED
//
The lid of the Spire III is installed using a quick mount system. To
remove the lid open it to its open position. Using your finger press in
the lock tab on the inside of the lid while pulling the lid out with your
other hand. The lid will slide out. To install another lid, speed feed or
another accessory simply push it in to the slot until it’s locked in place.
REMOVE
+
INSTALL SPIRE DRIVE
//
To remove the Spire Drive from the loader first open the Shell and
remove the Spire tray. After that pull the Spire Drive straight up. It will
come loose and you will be able to pull it away from the body. To
re-install the Spire Drive, align one of the arms into the ball tray and
rotate the Spire Drive a little. A magnetic lock will pull the Spire Drive
in place and lock it automatically.
MANUAL
//
PAGE 5
