™
LED POWER SAVER
//
Setting 2
: Shuts off the LEDs entirely save to battery power.
Setting 3
: Shuts off the LEDs save to battery power, but occasionally blinks green to let you know the
Spire III is on.
FIRMWARE UPGRADE MODE
//
Enter this setting to perform a firmware upgrade on the loader using your mobile phone (iOS or Android). Hold
in the Programming Button when the LED is Flickering Blue to put the loader into Wireless Receiving mode
and the LED will turn White. The loader is now Discoverable on the mobile application. If left in Discover mode
too long the Spire III will automatically reboot and exit the programming menu.
Start the application and press Upgrade Firmware. The app will show a your loader's serial number in the list.
Tap on the serial loader number and wait until the application indicates that the upgrade has been completed.
The loader will boot and resume normal operation. If the upgrade fails, the loader will revert back to the exist-
ing firmware.
FACTORY RESET
//
To return all setting to the factory defaults, while in programming mode, hold the bottom button down for 10
seconds until the LED turns white. Once the LED turns white, the led will then flash through the rainbow of
colors indicating that all settings have been returned to the factory default.
MANUAL
//
PAGE 10
CONTINUE FOR TROUBLESHOOTING TIPS
GREEN
VALUES 1-3
/
Default 1
FLICKERING
BLUE
Then WHITE when entered.
