™
BATTERY LIFE
//
The life of batteries varies very much depending on the type of batteries used, temperature, environmental
conditions, firing rate of the marker and the time used to fire the shots. As a general rule of thumb 1 set of
batteries should last about 20,000 shots or 1 year.
ELECTRONIC FORCE FEED
/
PROGRAMMING
/
MUTE BUTTON
//
The button on bottom of Spire III serves several functions. When the Spire III is on, it serves as an electronic
force feed button. Pressing the button causes the loader to feed forward.
When you hold the Force Feed button in for 2 seconds, it unmutes or mutes the speaker. The Spire III is
muted by default and remembers your previously saved setting.
The Force Feed button also allows you to enter the Spire III Programming Menu by holding this button in when
you turn the Spire on, then releasing it after the Spire starts up.
REBALLS
//
The Spire III was designed to be very reliable and easy on paintballs. This allows it to function with Reballs
or similar projectiles. Making sure the Reballs used are clean before loading them into the Spire III will
improve reliability.
If you are using Reballs, you should turn of the Auto Mode in the Yellow Drive Pressure setting. Set the
Yellow setting to a value of 3 or higher. Due to the very high friction of Reballs the feed rate will be lower,
wear on internal parts will increase, and battery consumption will be higher.
MANUAL
//
PAGE 4
