Virtual Research V6, User Manual

Page: 6 / 23

Section Two: Getting Started
Please contact Virtual Research Systems, Inc. immediately if you find that any of the contents listed
below are not present or have arrived damaged. Virtual Research Systems, Inc. (408) 748-8712
Box Contents
1) V6 HMD with 13 ft. cable.
2) V6 control box
3) Universal power supply
4) Power cord
5) No-fog cloth
Universal Power Supply:
Input AC Output DC - Max 30W
115/230 V~ +5V - - - 3A
0.9 / 0.45A +24V - - - 0.7A
60/50 Hz -12V - - - 0.5A
Out of the Box Set Up
Prior to opening your V6 HMD boxes, be sure you have plenty of room and a hard stable surface to
work on. We suggest keeping all packing materials for future shipping purposes.
Sale units will include an extra box containing a styrofoam display head. Demo units will not include a
styrofoam display head. Please treat demo units with additional care.
Step One Open the smaller of the two boxes and remove Styrofoam head. This head is to be used
to place HMD on while not in use or while connecting HMD to your computer.
Step Two Carefully open the side of the box which the shipping label is affixed. *This denotes
the top of box.
Step Three Remove the top layer of foam to reveal HMD.
Step Four Remove the HMD and the foam packaging to gain access to the power supply and
power cord. The V6 control box is located in a separate foam pocket by itself within
this area. Look under the foam cut out to reach the control box.
Each V6 comes with serial numbers located on the position sensor mounting plate and the control box.
DO NOT REMOVE . Removing these serial numbers may void the Virtual Research six (6) month
warranty.