14: Configuring SAToP and CESoPSN
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2016
GW6600 Series and GW6600V Series User Manual
Issue: 1.5
Page 142 of 384
USB-e1t1 card stats
---------------------
Line:
Frame Alignment Signal Errors 0
Line Code Errors 0
CRC Errors 1
Remote CRC Errors 0
TX Slips 275
RX Slips 0
Errored Seconds 0
Severely Errored Seconds 0
Unavailable Seconds 0
Flow 0:
Bytes TX 1806272 RX 1806336
Frames TX 0 RX 0
rxCrcErrors 0 rxLengthErrors 0
txUnderrunErr 4 txFifoErr 0
rxOverrunErr 0 rxCrcErr 0 rxLengthErr 0 rxAborts 0
14.9.8
cesop clear usbcard stats
To reset the E1 card statistical counters, enter:
root@VA_router:~# cesop clear usbcard stats
USB card stats cleared
14.9.9
cesop show usbcard version
To see the E1 card’s software, enter:
root@VA_router:~# cesop show usbcard version
USB card firmware version: 2.0.0
14.9.10
cesop show usbcard cpld status
The E1 card has a CPLD which is programmed on startup.
To see the result of E1 card’s CPLD programming, enter:
root@VA_router:~# cesop show usbcard cpld status
USB card CPLD programming status: 0
The status should be 0.