13: Configuring an Ethernet interface
_______________________________________________________________________________________________________
_____________________________________________________________________________________________________
© Virtual Access 2016
GW6600 Series and GW6600V Series User Manual
Issue: 1.5
Page 107 of 384
There are three sections in the Interfaces page.
Section
Description
Interface Overview
Shows existing interfaces and their status. You can create new, and edit existing
interfaces here.
Port Map
In this section you can map device ports to Ethernet interfaces. Ports are marked
with capital letters starting with 'A'. Type in space-separated port character in the
port map fields.
ATM Bridges
ATM bridges expose encapsulated Ethernet in AAL5 connections as virtual Linux
network interfaces, which can be used in conjunction with DHCP or PPP to dial
into the provider network.
13.2.1
Interface overview: editing an existing interface
To edit an existing interface, from the interface tabs at the top of the page, select the
interface you wish to configure. Alternatively, click Edit in the interface’s row.
13.2.2
Interface overview: creating a new interface
To create a new interface, in the Interface Overview section, click Add new interface.
The Create Interface page appears.
Figure 53: The create interface page
