1.877.4VPULSE
or
www.virginpulse.com
3 7
Setting the Number of Rings
ring select
on the right side of the base unit how long the TAD waits before it answers a
call. Slide the switch to the appropriate position.
3
The TAD answers after three rings.
5
The TAD answers after five rings
Setting the TAD to Answer Calls
To set the TAD to answer calls press
ans on
. The display will turn on.
Notes:
•
You can use a remote phone to set the TAD to answer Calls (see “Remote Commands”).
•
Set the TAD to not answer calls by pressing
ans on
again.
When the TAD answers a call, the outgoing message plays, then the TAD beeps and
begins recording.
The caller can leave a message of up to 2 minutes in length . After the caller hangs up or is
silent for more than 7 seconds, or the maximum message length is reached, the TAD
hangs up and resets to answer.
Notes:
If the TAD answers a call when its memory is full, it announces “Thank you for
calling, Bye Bye”. The TAD cannot record additional messages until you delete
some of
the old messages (see ”Deleting Messages”).
TELEPHONE ANSWERING DEVICE
