1.877.4VPULSE
or
www.virginpulse.com
4 0
Remote Operation
While you are away from your home or office you can use a touch-tone phone to enter your
remote operation security code and do any of the following:
•
Listen to your message
•
Turn on/off the TAD
Changing the Remote Operation Security Code
To use your TAD from a remote telephone you must first enter a 3-digit remote operation
security code. The security code for your TAD is preset 123. Use the preset code, or follow
these steps to change it.
(
Notes:
Steps 2 and 3 require you to enter your digit selection, press play/stop
to
abort setup.)
1.
Press and old down
erase
. The display shows the code’s first digit and the TAD
announces “first digits”.
2. Press skip
or repeat
to selection the desired digit.
3. Press
erase
to store the selected digits. The second digit appears and the TAD
announces “second digit”.
4. Repeat Steps 2 and 3 to set the second and third digits of the security code.
5. After you press
erase
to store the third digit, TAD announces your security code by
saying, “Code is---”.
To check your security code, press
erase
.
