Operator’s Manual
Operating Procedure
38/50
The information for a strip is displayed in the above image. If the barcode of the strip is inserted manually, the software
marks the strip with a red dot (right Figure). If the barcode on the strip is detected automatically (left Figure), the
software does not mark (see the Figures below).
3.3.11.
C
ONTINUOUS
L
OADING
During the running it is possible to add new samples and strips to the session, without the need to stop it. From the
running screen, it is possible to click on the buttons Add Samples or Urgent Sample, the instrument will so receive a
request to access to the sample’s rotor and to the strip rotor. The instrument’s CPU will complete any action it is
performing on one strip, and then will release the cover locking magnets. The program will tell the user that it is possible
to open the cover to load new samples.
The process of sample and Strip loading will be repeated exactly as described above.
Warning!! Do not remove any strip while loading the new ones, since this could reduce the yield of the instrument.
For the urgent samples, the strips related to them, will be processed as soon as possible, while those related to normal
samples, they will be scheduled to be processed after the previously loaded samples.
Summary of Contents for 30006590
Page 1: ...User Manual...
