For example the master arm function on the
AUTO/gain toggle would look like this
SimArmMasterArm 23 -2 -2 0 0x0 0 "MISC: MASTER ARM Switch -
ON"
SimSafeMasterArm 23 -2 -2 0x42 0x0 0 "MISC: MASTER ARM Switch
- OFF"
SimSafeMasterArm 25 -2 -2 0x42 0x0 0 "MISC: MASTER ARM Switch
- OFF"
SimSimMasterArm 25 -2 -2 0 0x0 0 "MISC: MASTER ARM Switch -
SIM"
The 23 and 25 number have to be changed as described
above.
Assigning a function to the
thumbwheels
The thumbwheels are converted to joystick axis in the
firmware, and will be shown as an axis in BMS setup
controller advanced tab.(figure 3)
Summary of Contents for ICP V1.7
Page 12: ......
